2023/06/09
Halt-wet material crusher is mostly used for organic fertilizer production line production and organic fertilizer processing, crushing chicken manure, pig manure and other animal feces and humic acid sodium and other raw materials, crushing granularity is good, humidity adaptability. Specifically manifested in its eight major advantages and characteristics:
1, the machine adopts two-stage rotor up and down crushing. The material is broken into fine particles through the upper rotor crusher, and then sent to the lower rotor to continue to break into fine powder, to achieve the effect of crushed powder and hammer powder, and then directly discharged from the discharge port.
2, the machine has no screen bottom, can crush more than 100 kinds of materials without plugging. Even the materials just salvaged can be crushed, and will not be crushed and blocked by the wet materials, causing the motor to burn out and affect production.
3. The whole machine of organic fertilizer equipment adopts high alloy wear-resistant hammer head, and the hammer piece is forged, which is particularly strong and wear-resistant. It is stronger and more wear-resistant than the ordinary hammer, which increases the service life of the hammer.
4. Semi-wet material crusher adopts bi-directional gap adjustment technology, no maintenance is required after hammer wear, and the hammer position can continue to be used. The particle size of the material can be controlled by adjusting the gap between the hammer head and the liner.
5, the whole machine adopts high-tech technology, only one person can easily operate. It is not only reliable in quality, but also easy to maintain.
6, semi-wet material grinder oil injection using centralized lubrication system. Lubricating oil can be injected without downtime during normal operation.
7, reasonable structure design. The rotor breaking wave fraction is broken by the upper and lower double-layer blade, and the breaking effect is 2 times that of other products. The material enters the crushing chamber through the feed port and is continuously ground by the double-layer blade to make the material meet the requirements of granulation. It is lined with high-strength leather, durable and wear-resistant, and completely eliminates the phenomenon of material sticking to the wall. The transmission connection part adopts flexible belt drive. The motor drives the pulley and belt directly to the main shaft, which makes the main shaft rotate at high speed to achieve the crushing effect.
8, the design of the machine is not designed to install the screen and grate bottom, crushing wet materials will not block the feed port.
