2023/10/13
Horizontal mixers are a common mixing and agitating equipment that is widely used in a variety of industrial and laboratory environments. However, this equipment is also prone to various failures.
1, the mixing effect is not good. The poor mixing effect may be due to the loosening or damage of the blade of the agitator, resulting in the eccentric force in the process of processing and mixing of the organic fertilizer production line, so that the material can not be fully mixed. In addition, if the material contains a large number of large particles or solid substances, it may also lead to poor mixing effect.
2, organic fertilizer equipment noise is too large. The noise generated by the horizontal mixer during operation may come from the bearing wear, the collision between the impeller blade and the container wall, or the motor vibration. In order to reduce noise, the bearing lubrication can be checked and replaced if necessary. At the same time, ensure that the distance between the agitator blade and the container wall is appropriate to reduce collision. For the noise generated by motor vibration, the installation of the motor can be checked and adjusted if necessary.
3. Motor overheating. Motor overheating may be caused by poor motor heat dissipation, long-term high load operation, or motor failure. It is necessary to check the heat dissipation of the motor and clean or replace the heat dissipation equipment if necessary. At the same time, avoid running at high load for a long time to prevent the motor from overheating. If the motor fails, it should be stopped immediately to check and repair or replace the motor.
