2024/01/09
1. The material discharged by the organic fertilizer dryer contains too much water.
Elimination method: At this time, fuel use should be increased or the feeding amount should be reduced at the same time. This operation should be gradually adjusted to the appropriate state. A large adjustment will cause the water content of the discharge to rise and fall, and can not meet the product quality requirements. Common faults and elimination methods of organic fertilizer dryer in organic fertilizer production line
2. The repeated force on the two stop wheels is greater.
Elimination method: This phenomenon should check the contact between the support wheel and the supporting wheel belt. The same group of support wheel is not parallel or the connection of two support wheels is not perpendicular to the axis of the cylinder, which will cause excessive force on the stop wheel, and also cause abnormal wear of the support wheel.
3. Low installation accuracy or loose bolts.
Elimination method: In the work wheel deviation from the correct position caused by. This phenomenon can disappear as soon as the support is restored to the correct position.
4. Abnormal sound from the gears in operation.
Elimination method: Some time should check the mesh clearance of the size of the gear. Adjust properly and you can return to normal. Pinion wear serious should be replaced in time. Good seal of gear cover to prevent dust from entering, sufficient lubricating oil, reliable lubrication is the key to improve the service life of gear. Thick gear oil or black oil should be added to the big gear cover.
