2025/07/03
The correct use of the large wheel compost turning machine can improve work efficiency and extend the service life of the equipment. The following are the operation steps and precautions:
1. Preparations before operation: Before use, check whether all components of the organic fertilizer equipment are complete, whether the connections are firm, and whether there is any looseness or damage. Check if there is oil in the reducer and clean the dirt on the equipment in time, especially the dirt on the chassis. If there is any peeling of protective paint, it should be repainted.
2. Startup and Operation: Start the turning equipment and observe whether the rotation direction is correct. If the rotation direction is reverse, stop immediately and change the three-phase circuit joints to change the rotation direction. When the equipment is running, listen for any abnormal sounds from the reducer and touch the temperature of each bearing to see if it is within the temperature range.
3. Load test run: During the load test run, the transmission parts of the flipping equipment should operate smoothly without any abnormal sounds. If there are any abnormal sounds, they should be inspected. The electronic control system should operate stably, start and stop sensitively, and act accurately.
4. Shutdown and Maintenance: Before shutting down the equipment, check if there is any accumulated material in front of the turning roller, and then lift the turning roller above the highest accumulation point of the material in the trough. The tightness of the transmission chain should be frequently checked and adjusted in time. If it is found that the links of the transmission chain do not rotate smoothly, they should be lubricated with grease or engine oil in time.
5. Daily maintenance: The walking support bearings on the chassis, the rotating support of the stirring shaft, and the lifting support bearings should be regularly lubricated with grease.
Through the above steps, it can be ensured that the large wheel disk turning machine operates safely and efficiently during use, and at the same time, the service life of the equipment can be prolonged.
