How to use the organic fertilizer production line scientifically and reasonably

To use the organic fertilizer production line scientifically and reasonably and ensure the efficient operation and long-term stability of the equipment, the following are some key points to note:

1. Equipment inspection and maintenance: Before use, check whether the bolts and nuts of all parts of the equipment are loose to ensure that the fasteners of the organic fertilizer equipment are firm. After each use, thoroughly remove any residual materials both inside and outside the equipment, and sweep up any scattered or splashed debris on the equipment.

2. Operating Procedures: Ensure that operators are familiar with the operating procedures of the equipment to prevent equipment failure caused by misoperation. Adhere to safety operation procedures, avoid illegal operations, and ensure operational safety.

3. Process optimization: Ensure that the moisture, carbon-nitrogen ratio, temperature and other conditions during the fermentation process are appropriate to avoid fermentation failure due to improper conditions. According to the fermentation stage and temperature, turn the pile regularly to ensure uniform fermentation. Arrange the production process reasonably, reduce unnecessary production links and lower the waste of resources during the production process.

4. Keep the workplace clean: Ensure that the equipment is stored in a dry and cool place, avoiding moisture and direct sunlight. Regularly clean the dust and debris around the equipment to keep it clean and tidy.

5. Troubleshooting and handling: Check whether the weight calibration of the instrument is correct, whether the gas line connection is correct, and whether the solenoid valve and cylinder are working properly. According to the fault prompts of the equipment, promptly identify and handle problems, such as adjusting the air pressure and replacing damaged parts.

Through the above measures, the failure rate of the organic fertilizer production line can be effectively reduced, production efficiency and product quality can be improved, and the service life of the equipment can be prolonged at the same time.