2024/08/01
The problem of vibration in the organic fertilizer crusher may be caused by the following reasons, and the following solutions can be considered:
1. Balance machine: Ensure that organic fertilizer equipment is not damaged or deviated from balance during installation or transportation. Use a level to check the horizontal position of the machine and adjust the bolts or gaskets to ensure balance.
2. Check the blade and hammer head: If the blade or hammer head is worn or loose, it may cause imbalance and vibration. Regularly inspect and replace worn blades or hammerheads, and tighten all bolts.
3. Check the transmission system: ensure that the transmission system (such as belt, chain, etc.) is operating normally, and there is no loosening or excessive wear. Lubricate the transmission system in time to ensure smooth operation.
4. Adjust the speed and feed speed: If the machine speed is too high or the feed speed is uneven, it will also cause vibration. Adjust the appropriate rotational speed and feed speed according to the production guide.
5. Reduce overload: Avoid running the machine in overload, which may lead to instability of the machine. Ensure proper feed control according to the production capacity of the organic fertilizer produciton line.
6. Machine foundation fixed: If the machine is fixed on the ground, ensure that the foundation is fixed firmly and will not move or loosen due to vibration.
7. Professional maintenance: If the above methods still cannot solve the problem, it is recommended to contact professional and technical personnel for overhaul and maintenance to eliminate more complex mechanical faults.
Through the above method, it can help diagnose and solve the vibration problem of the machine fertilizer crusher, and ensure the normal operation and production efficiency of the equipment.
