Organic fertilizer dryer in the operation of the need to pay attention to the problem

2024/09/11

The problems that need attention in the operation of organic fertilizer dryers include:

1. Equipment inspection: A thorough equipment inspection should be carried out before starting to ensure that all components are intact, the connection is tight, the power cord and plug are normal, and the filter is clean and properly installed.

2. Uniform feeding: the feeding should be uniform to avoid material blockage and uneven drying.

3. Temperature control: According to the characteristics of the material and the required drying degree, set the appropriate temperature and drying time.

4. Monitoring process: In the drying process, regularly check the drying of the material, observe the change of temperature, humidity and other indicators, to ensure that the organic fertilizer equipment runs smoothly, without abnormal noise, vibration and odor.

5. Shutdown procedure: Before stopping the drying, the fuel supply should be gradually reduced and the equipment should be shut down in the correct order.

6. Cleaning and maintenance: After drying, the inside of the dryer should be cleaned to prepare for the next use, and the equipment should be regularly maintained and lubricated.

7. Safe operation: The operator should abide by the safe operation procedures and avoid internal inspection and maintenance when the equipment is running.

8. Heat loss and dust control: pay attention to the heat preservation of the dryer, reduce heat loss, and take measures to control the generation and diffusion of dust.

9. Lubrication maintenance: Regularly lubricate the bearings and gears of the dryer to extend the service life of the equipment.

By following the above precautions, you can ensure the effective operation of the organic fertilizer dryer, improve the drying efficiency, and ensure the safety of the operator.


Share With:
Products
Tel
contact
inquiry