2023/12/04
Half-wet material crusher is a special production of organic fertilizer equipment, the use of this organic fertilizer equipment is very good. However, in the use of organic fertilizer crushrs should be used in the correct way, only the correct use can play its role. So, what is the correct use of organic fertilizer crusher?
1. Check the various parts of the equipment before starting, whether the fastening screws are loose, whether the lubricating oil in the bearing box is enough, or whether it is clean. These should be checked to avoid serious damage to the equipment
2, the above matters are determined after no abnormal situation in the boot, but this time is not allowed to feed, to let the equipment idling for a few minutes, once again confirm the coefficient of organic fertilizer crusher equipment. Semi-wet material crusher
3, the above are completed before the formal boot work, in the work of the feed must be uniform, to ensure that the organic fertilizer crusher equipment is working under the rated load. If the overload work, we must temporarily stop the feed, such as organic fertilizer crusher equipment to return to normal state after continuing to feed
4, is to observe the working pressure of the system at any time during use, especially the temperature of the bearing box. Avoid accidents
5, the work is finished, before preparing to shut down, be sure to stop the feed first, and then let the organic fertilizer crusher equipment continue to operate for a few minutes, until the materials in the crushing chamber are completely discharged after the shutdown
