2024/11/12
When using the flat die granulator, in order to ensure safe and efficient operation, the following matters should be noted:
1. Raw material inspection: When using, it should be noted that there should be no hard objects such as stones and iron blocks in the raw materials, so as not to damage the machine.
2. Adjust the material formula: If the particles are crushed or not pressed in real time, the crude fiber material formula should be reduced to less than 50%.
3. Treatment of no material: When there is no granulation and no material discharge, the film plate should be removed, and after opening the hole by hole, the appropriate addition of some fiber materials can be restarted for granulation.
4. Check the tightness of the belt: the tightness of the belt should be checked frequently, and the oil seal should be replaced in time when the gearbox has oil leakage.
5. Equipment inspection and maintenance: Before operating the organic fertilizer granulator, the operator should carefully check whether the organic fertilizer equipment is normal, and report to the maintenance personnel in time if there is an abnormal situation.
6. Operator training: pelleting machine operators must undergo professional training, master the relevant operating procedures and safety knowledge, and pass the assessment before the post operation.
7. No overload operation: the operator shall operate in accordance with the requirements of the regulations, and shall not violate the rules or change the equipment parameters without authorization.
8. Monitoring equipment operation: During the operation of the pelletizer, the operator shall not leave the post at will, and it is necessary to monitor the operation of the equipment throughout the process.
Following the above precautions can ensure the safe use of the flat mold granulator and improve production efficiency and product quality.
