Process flow of organic fertilizer production line

Organic fertilizer equipment is a kind of equipment used to make biological fertilizer from animal and plant residues, excrement and other organic wastes through fermentation, mixing, granulation and other processes. The following will introduce the process flow and installation and maintenance of the organic fertilizer production line in detail.

First, organic fertilizer equipment process:

1. Fermentation: The collected organic waste will be fermented to achieve the appropriate temperature and humidity to promote the growth of microorganisms.

2. Ingredients: Mix the fermented organic waste with binder, functional bacteria, nitrogen, phosphorus, potassium and other nutrients in a certain proportion.

3. Mixing: the ingredients into the multi-dimensional high-efficiency mixer for rapid mixing, to ensure that the material is fully uniform.

4. Granulation: the mixed material is sent to the extrusion granulator, and the material is extruded into columnar particles through a high-speed rotating template.

5. Polishing and shaping: the cylindrical particles are sent to the round particle polishing and shaping machine to polish and form spherical particles.

6. Drying: the ball particles are sent into the drying, cooling, screening machine for drying treatment, so that its moisture reaches the specified range.

7. Cooling: The dried particles enter the cooling section for air cooling, so that its temperature is reduced to normal temperature.

8. Screening: the cooled particles are sent to the screening machine to separate the finished particles that meet the specifications.

9. Packaging: The finished particles screened out are measured, packed and stored.

Second, installation and maintenance of organic fertilizer equipment:

10. Installation: The organic fertilizer equipment should be installed on a horizontal concrete foundation and fixed with foot bolts. Pay attention to the vertical of the main body and the horizontal when installing.

11. Check: After the installation is complete, check whether the bolts in each part are loose and whether the main engine compartment door is fastened.

12. Test run: After the inspection, carry out no-load test run. Production can be carried out only after the test run is normal.