What should be done when the bearings of organic fertilizer equipment do not rotate smoothly

When the bearings of the organic fertilizer equipment do not rotate flexibly, the following steps can be followed for inspection and handling:

1. Check the lubrication condition: If the bearing does not rotate smoothly, it may be due to insufficient lubrication or improper selection of lubricant. Check whether the grease or lubricating oil is sufficient and whether it meets the equipment requirements.

2. Check the installation status: Incorrect installation of the bearing may cause the inner and outer rings to be misaligned, thereby affecting the rotational flexibility. Ensure that the dimensions of the shaft and the bearing housing fit correctly to avoid the bearing rotating inflexibly due to insufficient or excessive interference.

3. Check the wear condition of the bearings: Observe whether there is any wear, peeling, scratches or discoloration on the raceways, rollers and cages of the bearings. Excessive or insufficient bearing clearance will affect the rotational flexibility. If the gap is not appropriate, it needs to be readjusted.

4. Check for other possible issues: Inspect whether there are any foreign objects entering the bearing, causing it to rotate inflexibly. Check whether the bearing is tilted or off-center due to improper installation or external force, as this may cause inflexible rotation.

5. Repair or replacement: If the wear or damage to the bearing is not severe, you can attempt to repair it.

6. Daily maintenance suggestions: Regularly check the lubrication condition and wear degree of the bearings, and replenish or replace the lubricant in a timely manner. Ensure that the surrounding environment of the bearing is clean and prevent foreign objects from entering the interior of the bearing. When installing bearings, strictly follow the technical requirements to ensure correct installation.

Through the above steps, the problem of inflexibility in the rotation of bearings in organic fertilizer equipment can be effectively solved, and the service life of the organic fertilizer production line can be prolonged.