How to maintain organic fertilizer crusher?

1. The maintenance of organic fertilizer equipment needs to focus on the following aspects

1) Check the power supply, check the power socket, plug, power cord is hypoxia, fall off, broken.

2) Check whether the lubrication condition of bearings is good, and regularly use lubricating oil for maintenance.

3) Check whether all fasteners are tight, and deal with them in time if they are loose.

4) Check whether the transmission belt is installed correctly and in good condition. If the belt is damaged, it should be replaced in time. When there is oil on the belt or pulley, it should be promptly wiped off with a clean rag.

5) Check whether there is material or other debris in the damaged cavity, and clean it up if necessary.

6) Check the sealing condition of the fan to prevent sand from causing serious wear on the fan, resulting in the loss of the impeller body and rivet head of the hub, and fatigue cracks in the rivet holes.

Two, inspection and maintenance equipment should pay attention to the following points

1) Lubrication and replacement of bearings: organic fertilizer crusher should clean bearings every 300 hours. When the bearing of the crusher is seriously worn or damaged, it should be replaced in time, and pay attention to strengthen lubrication; Adjust by adding or removing the paper pad at the bearing cover.

2) Replacement of tooth claw and hammer: Among the grinding parts, grinding tooth claw and hammer are vulnerable parts in straw shredder, and also the main parts affecting the grinding quality and productivity of organic fertilizer production line. Grinding tooth claw and hammer should be replaced in time after wear.