Organic fertilizer granulator equipment failure method

2019/05/14

In the production work of the organic fertilizer granulator, various failure occur, which is a normal phenomenon. There are many reasons for failures, some caused by long-term use of aging, and some caused by human error, but no matter what kind of faults are caused by improper maintenance, if properly maintained and avoided If you make a mistake, there will not be so many problems and problems. Therefore, we need to review, and we need to take seriously the numerous failures of the granulator. We need to find the cause seriously and take measures to solve and deal with it.

So, when organic fertilizer granulator we use fails, what should we do to solve the problem?
For example, when we use the organic fertilizer granulator, when the motor is overheated and its sound is abnormal, we must first confirm the following points:
1. The bearing is poorly lubricated or is worn out seriously;
2. Poor contact in the switch circuit, or single-phase disconnection;
3. Is the voltage too low? If the granulator is not working properly during operation, the cylinder is caught by the obstacle, and even the cylinder cannot be rotated, and the bottom box vibrates.
organic fertilizer granulator
We are a organic fertilizer production equipment manufacturer, our organic fertilizer granulator is the best, many fertilizer granulators have applied for patents, we are 20 years old factory, we are famous. Our most popular set of fertilizer equipment is: fertilizer granulating production lineorganic fertilizer production linenpk fertilizer production line. we can customize the solution according to your specific situation. Inquiry It Now!

The cause of the above phenomenon is often caused by the object of the bottom box being stuck, and then the granulated material is detached, causing the cylinder to squeak and, in severe cases, the barrel to be scratched. At this time, it should be stopped for maintenance, troubleshooting, and the reducer of the organic fertilizer granulator is overheated. The reason is that the oil is insufficient or the oil is bad; the gear and the worm are worn too much, or the meshing is not good; the bearing is poorly lubricated or worn. Serious. If the magnetic field strength of the organic fertilizer granulator becomes weak, the reason for this is generally that the temperature is too high; the fuselage is exposed to sunlight; acid and alkali corrosion.

The above are the reasons for some common faults when users use organic fertilizer granulators and the quick release method.  if you use the organic fertilizer granulator above the situation, do not worry, as long as the solution described above even troubleshooting can be solved.

Share With:
Products
Tel
contact
inquiry