2025/01/20
Assessing the wear of organic fertilizer equipment can be done in several ways:
1. Appearance check: Check whether the shell of the device is obviously damaged or deformed, and whether there is oil leakage or water leakage. At the same time, pay attention to check whether the connecting parts of the equipment are loose, such as fastening bolts, wiring terminals, etc.
2. Wear marks: Check the key components of the equipment, such as mixing blades, screens, transmission chains, etc., whether there are obvious wear marks. Wear marks can be judged by sight or touch.
3. Motor inspection: Check whether the shell of the motor has obvious damage or deformation, whether there is oil leakage, water leakage and other phenomena. At the same time, pay attention to check whether the connecting parts of the motor are loose, such as fastening bolts, wiring terminals, etc.
4. Bearing inspection: By observing whether the bearing has abnormal noise, vibration and other phenomena to judge the working state of the bearing. In addition, check the lubrication of the bearing to ensure that the bearing can be lubricated normally.
5. Temperature check: check whether the temperature of the motor is normal and whether there is overheating. An infrared thermometer can be used to measure the temperature of the motor surface to ensure that it is within the normal range.
6.Vibration check: check the vibration of the motor, whether there is abnormal vibration. The vibration amplitude of the motor can be measured using a vibration tester to ensure that it is within the normal range.
Through the above methods, the wear situation of organic fertilizer equipment can be comprehensively evaluated, the wear problem can be found and dealt with in time, the service life of the equipment can be extended, and the production efficiency of the organic fertilizer production line can be improved.
