The disc granulator plate is equipped with three discharge ports, which is convenient for intermittent production, greatly reduces labor intensity and improves labor efficiency. This machine has the characteristics of uniform granulation, high granulation rate, stable operation, strong and durable equipment,
fertilizer granulator machine price concessions, long service life and so on. It is an ideal equipment for the majority of users.
Precautions for disc granulator
① The granulator should be in reverse operation.
② The granulator should not be operated on an empty stomach, but should be fed by the hot machine, so as to avoid stick (hold shaft) phenomenon.
③ It is strictly forbidden to enter iron and other sundries in the feed port and vent hole of granulator. In order to avoid accidents and affect production.
How to start up
① Before starting the machine, first raise the temperature for about forty to fifty minutes. Raise the temperature to the point where you can pull the motor V-belt by hand until it is free; continuously pull it eight to ten times according to the normal working direction. Then continue to heat up for about 10 minutes, and then start the machine, but continue to heat up, because normal production needs to continue to supplement heat; adjust different temperatures according to different properties of plastics.
② When the
organic fertilizer granulator machine is working normally, the temperature of the granulator should be kept stable, not high or low. Close to the vent hole until the temperature of the machine head is about 200 ℃.
③ Feed evenly and add enough. The feeding speed and feeding speed of the machine should be matched properly. Otherwise, it will affect the quality and yield of particles.
④ When the main engine is shut down, cut off the power. Take off the screw plug (with wrench).
